Technical data sheet
MTB2500110

Drilling › Drills › Drills – short series › MTB25

MTB2500110

Solid carbide micro twist drill – short series

Dimensions

d1h6d2h6l1+/-0.2l20/+0.5
1.11.128.07.0

Properties

CoatingNo
Coolant holesNo
Point angle118°
Helix angle25°
Flutes2
StandardTUSA

Cutting parameters

MaterialDescriptionMachinabilityVcm/minfnmm/rev
P.0Long chipping Low Carbon SteelsRecommended40-600.01-0.03
P.1Short chipping Low Carbon SteelsRecommended40-600.01-0.03
P.2Medium and High Carbon SteelsRecommended40-600.01-0.03
P.3Alloy Steels, Tool Steels (N/mm² 600-850)Recommended30-500.01-0.02
P.4Alloy Steels, Tool Steels (N/mm² 850-1400)Partially recommended20-400.01-0.02
P.5Ferritic, Martensitic, PH SSPartially recommended15-300.003-0.01
P.6High Strength Ferritic, Martensitic, PH SSPartially recommended15-300.003-0.01
M.1Austenitic Stainless SteelPartially recommended15-300.003-0.01
M.2High Strength Austenitic SS, Cast SSPartially recommended15-300.003-0.01
M.3Duplex SSPartially recommended15-300.003-0.01
K.1Grey Cast IronPartially recommended30-500.02-0.03
K.2Low and Medium Strength CGI, Ductile IronsPartially recommended30-500.02-0.03
K.3High Strength Ductile and Austempered Ductile IronPartially recommended30-500.02-0.03
N.1Wrought AluminiumRecommended60-1000.03-0.06
N.2Low Si Al Alloys and Magnesium Alloys Si<12%Recommended60-1000.03-0.06
N.3High Si Al Alloys Si>12%Recommended50-800.01-0.04
N.4Copper, Brass, Zinc Based AlloysRecommended30-700.03-0.06
O.1Thermoplastic and thermosetting materialsRecommended60-1000.03-0.06