Technical data sheet
Milling › End mills › MS124
MS12400180
2-flute solid carbide end mill (DIN 6528 standard) – short series
Dimensions
| d1h11 | d2h6 | l1+1/0 | l2+1/0 |
|---|---|---|---|
| 18.0 | 18.0 | 100.0 | 30.0 |
Properties
| Coating | No |
| Helix angle | 25° |
| Flutes | 2 |
| Standard | TUSA |
Cutting parameters
| Material | Description | Machinability | Vcm/min | fnmm/rev |
|---|---|---|---|---|
| N.1 | Wrought Aluminium | Recommended | 200-400 | 0.108 |
| N.2 | Low Si Al Alloys and Magnesium Alloys Si<12% | Recommended | 200-400 | 0.108 |
| N.3 | High Si Al Alloys Si>12% | Recommended | 160-200 | 0.108 |
| N.4 | Copper, Brass, Zinc Based Alloys | Recommended | 160-200 | 0.108 |
| O.1 | Thermoplastic and thermosetting materials | Recommended | 200-400 | 0.108 |