Swiss engineering, high precision

TTD1800095E

180° high-performance solid carbide pilot drill with reinforced shank, coated

d1m5d2h6d3+/-0.02l1+/-0.2l2+/-0.05l30/+0.2
0.954.01.940.03.36.7
CoatingYes
Coolant holesNo
Point angle180°
Flutes2
Chamfer45°
MaterialDescriptionMachinabilityVcm/minfnmm/rev
P.0Long chipping Low Carbon SteelsRecommended65-800.08-0.10
P.1Short chipping Low Carbon SteelsRecommended65-800.08-0.10
P.2Medium and High Carbon SteelsRecommended65-800.08-0.10
P.3Alloy Steels, Tool Steels (N/mm² 600-850)Recommended50-600.006-0.008
P.4Alloy Steels, Tool Steels (N/mm² 850-1400)Recommended40-500.006-0.008
P.5Ferritic, Martensitic, PH SSRecommended35-500.006 -0.008
P.6High Strength Ferritic, Martensitic, PH SSRecommended35-500.003-0.004
M.1Austenitic Stainless SteelRecommended25-300.003-0.004
M.2High Strength Austenitic SS, Cast SSRecommended25-300.003-0.004
M.3Duplex SSRecommended25-300.003-0.004
K.1Grey Cast IronRecommended70-800.008-0.010
K.2Low and Medium Strength CGI, Ductile IronsRecommended60-700.008-0.010
K.3High Strength Ductile and Austempered Ductile IronRecommended60-700.008-0.010
N.1Wrought AluminiumPartially recommended115-1250.010-0.015
N.2Low Si Al Alloys and Magnesium Alloys Si<12%Partially recommended115-1250.010-0.015
N.3High Si Al Alloys Si>12%Partially recommended115-1250.010-0.015
N.4Copper, Brass, Zinc Based AlloysPartially recommended65-1000.006-0.015
S.1Iron Based HRSAPartially recommended15-200.002-0.003
S.2Co Based HRSAPartially recommended15-200.003-0.004
S.3Ni Based HRSAPartially recommended15-200.002-0.003
S.4Ti and Ti AlloysPartially recommended20-300.006-0.008
H.1Hardened Materials (HRC 44-48)Partially recommended15-200.002-0.003
H.2Hardened Materials (HRC 48-55)Partially recommended15-200.002-0.003
O.1Thermoplastic and thermosetting materialsPartially recommended115-1250.010-0.015
Catalog
Search by code
Search by machining operation