Swiss engineering, high precision

MTB25N0102

Solid carbide drill with 0.01 mm increments and without internal cooling holes for steel

d1h6d2h6l10/+1l20/+1
1.021.0240.015.0
CoatingNo
Coolant holesNo
Point angle118°
Helix angle25°
Flutes2
StandardTUSA
MaterialDescriptionMachinabilityVcm/minfnmm/rev
P.0Long chipping Low Carbon SteelsRecommended10-200.015-0.03
P.1Short chipping Low Carbon SteelsRecommended10-200.015-0.03
P.2Medium and High Carbon SteelsRecommended10-200.015-0.03
P.3Alloy Steels, Tool Steels (N/mm² 600-850)Recommended10-200.012-0.025
P.4Alloy Steels, Tool Steels (N/mm² 850-1400)Partially recommended8-150.010-0.018
P.5Ferritic, Martensitic, PH SSPartially recommended8-150.010-0.018
P.6High Strength Ferritic, Martensitic, PH SSPartially recommended8-150.010-0.018
M.1Austenitic Stainless SteelPartially recommended5-150.008-0.016
M.2High Strength Austenitic SS, Cast SSPartially recommended5-150.008-0.016
M.3Duplex SSPartially recommended5-150.008-0.016
K.1Grey Cast IronPartially recommended20-400.015-0.03
K.2Low and Medium Strength CGI, Ductile IronsPartially recommended20-400.012-0.025
K.3High Strength Ductile and Austempered Ductile IronPartially recommended20-400.012-0.025
N.1Wrought AluminiumRecommended30-500.03 - 0.06
N.2Low Si Al Alloys and Magnesium Alloys Si<12%Recommended30-500.03 - 0.06
N.3High Si Al Alloys Si>12%Recommended30-500.020-0.050
N.4Copper, Brass, Zinc Based AlloysRecommended10-500.025-0.050
S.4Ti and Ti AlloysPartially recommended8-150.010-0.018
H.1Hardened Materials (HRC 44-48)Partially recommended8-150.03 - 0.06
H.2Hardened Materials (HRC 48-55)Partially recommended8-150.03 - 0.06
O.1Thermoplastic and thermosetting materialsRecommended30-500.03 - 0.06
Catalog
Search by code
Search by machining operation