| P.0 | Long chipping Low Carbon Steels | Recommended | 5-12 | 0.003-0.008 |
| P.1 | Short chipping Low Carbon Steels | Recommended | 5-12 | 0.003-0.008 |
| P.2 | Medium and High Carbon Steels | Recommended | 5-12 | 0.003-0.008 |
| P.3 | Alloy Steels, Tool Steels (N/mm² 600-850) | Recommended | 4-9 | 0.002-0.007 |
| P.4 | Alloy Steels, Tool Steels (N/mm² 850-1400) | Recommended | 3,3-7 | 0.002-0.006 |
| P.5 | Ferritic, Martensitic, PH SS | Recommended | 4-9 | 0.002-0.005 |
| P.6 | High Strength Ferritic, Martensitic, PH SS | Recommended | 4-9 | 0.002-0.005 |
| M.1 | Austenitic Stainless Steel | Recommended | 3-8 | 0.002-0.004 |
| M.2 | High Strength Austenitic SS, Cast SS | Recommended | 3-8 | 0.002-0.004 |
| M.3 | Duplex SS | Recommended | 3-8 | 0.002-0.004 |
| K.1 | Grey Cast Iron | Recommended | 5-12 | 0.003-0.008 |
| K.2 | Low and Medium Strength CGI, Ductile Irons | Recommended | 4-10 | 0.002-0.007 |
| K.3 | High Strength Ductile and Austempered Ductile Iron | Recommended | 4-10 | 0.002-0.007 |
| N.1 | Wrought Aluminium | Recommended | 6-19 | 0.002-0.006 |
| N.2 | Low Si Al Alloys and Magnesium Alloys Si<12% | Recommended | 5,5-17 | 0.003-0.007 |
| N.3 | High Si Al Alloys Si>12% | Recommended | 5,5-15 | 0.003-0.006 |
| N.4 | Copper, Brass, Zinc Based Alloys | Partially recommended | 5,5-18 | 0.002-0.006 |
| S.1 | Iron Based HRSA | Recommended | 2,5-7 | 0.002-0.004 |
| S.2 | Co Based HRSA | Recommended | 2,5-7 | 0.002-0.004 |
| S.3 | Ni Based HRSA | Recommended | 2,5-7 | 0.002-0.004 |
| S.4 | Ti and Ti Alloys | Partially recommended | 5-8 | 0.002-0.006 |
| O.1 | Thermoplastic and thermosetting materials | Recommended | 5-12 | 0.003-0.01 |
