Swiss engineering, high precision

MS33000080

Solid carbide micro end mill for precision machining, coated

d1-0.01/+0.005d2h5l10/+1l20/+0.5
0.83.039.02.4
CoatingYes
Helix angle30°
Flutes3
StandardTUSA
MaterialDescriptionMachinabilityVcm/minfnmm/rev
P.0Long chipping Low Carbon SteelsRecommended60-800.008-0.02
P.1Short chipping Low Carbon SteelsRecommended60-800.008-0.2
P.2Medium and High Carbon SteelsRecommended60-800.008-0.02
P.3Alloy Steels, Tool Steels (N/mm² 600-850)Recommended50-700.008-0.02
P.4Alloy Steels, Tool Steels (N/mm² 850-1400)Recommended40-600.006-0.02
P.5Ferritic, Martensitic, PH SSRecommended30-500.006-0.02
P.6High Strength Ferritic, Martensitic, PH SSRecommended30-500.006-0.02
M.1Austenitic Stainless SteelRecommended25-400.005-0.016
M.2High Strength Austenitic SS, Cast SSRecommended25-400.005-0.016
M.3Duplex SSRecommended25-400.005-0.016
K.1Grey Cast IronRecommended40-700.008-0.02
K.2Low and Medium Strength CGI, Ductile IronsRecommended30-600.006-0.02
K.3High Strength Ductile and Austempered Ductile IronRecommended30-600.006-0.02
N.1Wrought AluminiumRecommended70-1000.006-0.02
N.2Low Si Al Alloys and Magnesium Alloys Si<12%Recommended80-1200.008-0.02
N.3High Si Al Alloys Si>12%Recommended60-1000.008-0.02
N.4Copper, Brass, Zinc Based AlloysRecommended25-800.006-0.02
S.1Iron Based HRSARecommended25-400.003-0.008
S.2Co Based HRSARecommended25-400.003-0.008
S.3Ni Based HRSARecommended25-400.003-0.008
S.4Ti and Ti AlloysRecommended25-500.006-0.015
H.1Hardened Materials (HRC 44-48)Recommended25-400.002-0.004
H.2Hardened Materials (HRC 48-55)Recommended25-400.002-0.004
O.1Thermoplastic and thermosetting materialsRecommended80-1200.008-0.02
Catalog
Search by code
Search by machining operation