Swiss engineering, high precision

MS33000260

Solid carbide micro end mill for precision machining, coated

d1-0.01/+0.005d2h5l10/+1l20/+0.5
2.63.039.07.8
CoatingYes
Helix angle30°
Flutes3
StandardTUSA
MaterialDescriptionMachinabilityVcm/minfnmm/rev
P.0Long chipping Low Carbon SteelsRecommended60-800.018-0.04
P.1Short chipping Low Carbon SteelsRecommended60-800.018-0.04
P.2Medium and High Carbon SteelsRecommended60-800.018-0.04
P.3Alloy Steels, Tool Steels (N/mm² 600-850)Recommended50-700.018-0.04
P.4Alloy Steels, Tool Steels (N/mm² 850-1400)Recommended40-600.015-0.035
P.5Ferritic, Martensitic, PH SSRecommended30-500.015-0.035
P.6High Strength Ferritic, Martensitic, PH SSRecommended30-500.015-0.035
M.1Austenitic Stainless SteelRecommended25-400.014-0.028
M.2High Strength Austenitic SS, Cast SSRecommended25-400.014-0.028
M.3Duplex SSRecommended25-400.014-0.028
K.1Grey Cast IronRecommended40-700.018-0.04
K.2Low and Medium Strength CGI, Ductile IronsRecommended30-600.015-0.035
K.3High Strength Ductile and Austempered Ductile IronRecommended30-600.015-0.035
N.1Wrought AluminiumRecommended70-1000.015-0.035
N.2Low Si Al Alloys and Magnesium Alloys Si<12%Recommended80-1200.018-0.04
N.3High Si Al Alloys Si>12%Recommended60-1000.018-0.04
N.4Copper, Brass, Zinc Based AlloysRecommended25-800.015-0.04
S.1Iron Based HRSARecommended25-400.015-0.03
S.2Co Based HRSARecommended25-400.015-0.03
S.3Ni Based HRSARecommended25-400.015-0.03
S.4Ti and Ti AlloysRecommended25-500.012-0.03
H.1Hardened Materials (HRC 44-48)Recommended25-400.004-0.006
H.2Hardened Materials (HRC 48-55)Recommended25-400.004-0.006
O.1Thermoplastic and thermosetting materialsRecommended80-1200.018-0.04
Catalog
Search by code
Search by machining operation