Swiss engineering, high precision

MS33000500

Solid carbide micro end mill for precision machining, coated

d1-0.01/+0.005d2h5l10/+1l20/+0.5
5.06.057.015.0
CoatingYes
Helix angle30°
Flutes3
StandardTUSA
MaterialDescriptionMachinabilityVcm/minfnmm/rev
P.0Long chipping Low Carbon SteelsRecommended60-800.020-0.040
P.1Short chipping Low Carbon SteelsRecommended60-800.020-0.040
P.2Medium and High Carbon SteelsRecommended60-800.020-0.040
P.3Alloy Steels, Tool Steels (N/mm² 600-850)Recommended50-700.020-0.040
P.4Alloy Steels, Tool Steels (N/mm² 850-1400)Recommended40-600.020-0.040
P.5Ferritic, Martensitic, PH SSRecommended30-500.015-0.035
P.6High Strength Ferritic, Martensitic, PH SSRecommended30-500.015-0.035
M.1Austenitic Stainless SteelRecommended25-400.015-0.035
M.2High Strength Austenitic SS, Cast SSRecommended25-400.015-0.035
M.3Duplex SSRecommended25-400.015-0.035
K.1Grey Cast IronRecommended40-700.030-0.060
K.2Low and Medium Strength CGI, Ductile IronsRecommended30-600.030-0.060
K.3High Strength Ductile and Austempered Ductile IronRecommended30-600.030-0.060
N.1Wrought AluminiumRecommended70-1000.030-0.060
N.2Low Si Al Alloys and Magnesium Alloys Si<12%Recommended80-1200.030-0.060
N.3High Si Al Alloys Si>12%Recommended60-1000.030-0.060
N.4Copper, Brass, Zinc Based AlloysRecommended25-800.030-0.060
S.1Iron Based HRSARecommended25-400.025-0.045
S.2Co Based HRSARecommended25-400.025-0.045
S.3Ni Based HRSARecommended25-400.025-0.045
S.4Ti and Ti AlloysRecommended25-500.025-0.045
H.1Hardened Materials (HRC 44-48)Recommended25-400.005-0.008
H.2Hardened Materials (HRC 48-55)Recommended25-400.005-0.008
O.1Thermoplastic and thermosetting materialsRecommended80-1200.030-0.060
Catalog
Search by code
Search by machining operation