Swiss engineering, high precision

MS33000030

Solid carbide micro end mill for precision machining, coated

d1-0.01/+0.005d2h5l10/+1l20/+0.5
0.33.039.00.9
CoatingYes
Helix angle30°
Flutes3
StandardTUSA
MaterialDescriptionMachinabilityVcm/minfnmm/rev
P.0Long chipping Low Carbon SteelsRecommended60-800.005-0.01
P.1Short chipping Low Carbon SteelsRecommended60-800.005-0.01
P.2Medium and High Carbon SteelsRecommended60-800.005-0.01
P.3Alloy Steels, Tool Steels (N/mm² 600-850)Recommended50-700.005-0.01
P.4Alloy Steels, Tool Steels (N/mm² 850-1400)Recommended40-600.004-0.01
P.5Ferritic, Martensitic, PH SSRecommended30-500.004-0.01
P.6High Strength Ferritic, Martensitic, PH SSRecommended30-500.004-0.01
M.1Austenitic Stainless SteelRecommended25-400.004-0.008
M.2High Strength Austenitic SS, Cast SSRecommended25-400.004-0.008
M.3Duplex SSRecommended25-400.004-0.008
K.1Grey Cast IronRecommended40-700.005-0.01
K.2Low and Medium Strength CGI, Ductile IronsRecommended30-600.004-0.01
K.3High Strength Ductile and Austempered Ductile IronRecommended30-600.004-0.01
N.1Wrought AluminiumRecommended70-1000.004-0.01
N.2Low Si Al Alloys and Magnesium Alloys Si<12%Recommended80-1200.005-0.01
N.3High Si Al Alloys Si>12%Recommended60-1000.005-0.01
N.4Copper, Brass, Zinc Based AlloysRecommended25-800.004-0.01
S.1Iron Based HRSARecommended25-400.003-0.008
S.2Co Based HRSARecommended25-400.003-0.008
S.3Ni Based HRSARecommended25-400.003-0.008
S.4Ti and Ti AlloysRecommended25-500.003-0.008
H.1Hardened Materials (HRC 44-48)Recommended25-400.002-0.004
H.2Hardened Materials (HRC 48-55)Recommended25-400.002-0.004
O.1Thermoplastic and thermosetting materialsRecommended80-1200.005-0.01
Catalog
Search by code
Search by machining operation