
How can stability be achieved in deep-hole drilling?
Deep-hole drilling (10xD, 20xD, 30xD) on CNC machining centers is a high-risk process that requires a strict protocol. Stability does not come from the long drill, which is extremely flexible, but from the pilot hole that guides it. The standard process is: pilot hole (2xD depth, precise tolerance) -> insert the long drill at low rpm (e.g. 300 rpm) with rapid feed -> activate spindle speed and coolant -> drill -> retract at low rpm.
Which drills should be used for stable 10×D deep-hole drilling?
Deep-hole drills:
- Double Margin: Essential to maintain direction and burnish the hole walls.
- Polished Flutes: Required to evacuate chips over long distances without clogging.
- Internal Coolant: Mandatory. Without pressure to push chips out, deep-hole drilling is not viable.
How can tool deflection and breakage be avoided in deep-hole drilling?
Hole deviation:
- Causes: Incorrect pilot-drill point angle (it must be > or = to that of the long drill), spindle misalignment, or material inhomogeneity.
- Prevention: Use solid-carbide drills up to 20-30xD. Beyond that, switch to single-lip gun drills, which are self-guiding.
When should drills with internal coolant be used for deep-hole drilling?
Through Spindle Coolant (TSC):
- Pressure: At least 20-30 bar for 10xD, >50 bar for 20xD.
- Emulsion: Use a high oil concentration (8-10%) to lubricate the margins that remain in contact with the hole wall for a long time.