d1	d2	l1	l2
1,00	3,00	39	3,00

Coolant holes	Cut	Spiral angle	Cutting edges Z
No	Right	30°	3

Coated	Coating type	Material	Material type	Norm
Yes	ALCRONOS	MD	SMG SP	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/dente)
	Unalloyed steels up to 800 N/mm2		60 : 90	0.008 - 0.020
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		60 : 90	0.008 - 0.020
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		40 : 60	0.008 - 0.020
	Ferritic stainless steels		50 : 70	0.007 - 0.015
	Martensitic stainless steels		50 : 70	0.007 - 0.015
	Martensitic stainless steels - PH		50 : 70	0.007 - 0.015
	Austenitic stainless steels		50 : 70	0.007 - 0.015
	Gray/lamellar cast iron		90 : 120	0.008 - 0.025
	Nodular/nodular cast iron		90 : 120	0.008 - 0.025
	Drawn aluminum alloys		200 : 250	0.008 - 0.025
	Die-cast aluminum alloys		200 : 250	0.008 - 0.025
	Copper		140 : 180	0.008 - 0.025
	Brass - Bronze		140 : 180	0.008 - 0.025
	Lead-free brass		110 : 160	0.008 - 0.025
	Super alloys (Inconel - Hastelloy - Nimonic)		30 : 50	0.008 - 0.015
	Pure titanium (Grade 2 - Grade 4)		25 : 35	0.008 - 0.015
	Titanium alloys (Grade 5)		30 : 50	0.008 - 0.015
	Cobalt Chrome Alloys		30 : 50	0.008 - 0.015
	Hardened steels up to 55 HRC		25 : 35	0.003-0.005
	Hardened steels from 55 HRC		-	-

Technical Sheet