d1	d2	l1	l2
0,75	3,00	38	4,50

Coolant holes	Cut	Point angle	Spiral angle	Cutting edges Z
No	Right	130°	35°	2

Coated	Coating type	Material	Material type	Norm
Yes	TISINOS	MD	SMG 10	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/rev)
	Unalloyed steels up to 800 N/mm2		12 : 35	0.008 - 0.015
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		12 : 35	0.008 - 0.015
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		12 : 35	0.008 - 0.015
	Ferritic stainless steels		9 : 25	0.005 - 0.012
	Martensitic stainless steels		9 : 25	0.005 - 0.012
	Martensitic stainless steels - PH		6 : 20	0.004 - 0.009
	Austenitic stainless steels		-	-
	Gray/lamellar cast iron		12 : 35	0.008 - 0.015
	Nodular/nodular cast iron		12 : 35	0.008 - 0.015
	Drawn aluminum alloys		19 : 45	0.006 - 0.012
	Die-cast aluminum alloys		15 : 35	0.006 - 0.012
	Copper		18 : 40	0.006 - 0.012
	Brass - Bronze		15 : 35	0.006 - 0.012
	Lead-free brass		15 : 35	0.006 - 0.012
	Super alloys (Inconel - Hastelloy - Nimonic)		9 : 18	0.006 - 0.012
	Pure titanium (Grade 2 - Grade 4)		9 : 18	0.006 - 0.012
	Titanium alloys (Grade 5)		6 : 12	0.005 - 0.009
	Cobalt Chrome Alloys		-	-
	Hardened steels up to 55 HRC		6 : 12	0.005 - 0.009
	Hardened steels from 55 HRC		-	-

Technical Sheet