d1	d2	l1	l2
3,30	6,00	66	17,00

Coolant holes	Cut	Point angle	Spiral angle	Cutting edges Z
No	Right	140°	30°	2

Coated	Coating type	Material	Material type	Norm
Yes	TISINOS	MD	SMG 10	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/rev)
	Unalloyed steels up to 800 N/mm2		35 : 60	0.070 - 0.130
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		35 : 60	0.070 - 0.130
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		35 : 60	0.070 - 0.130
	Ferritic stainless steels		25 : 50	0.050 - 0.080
	Martensitic stainless steels		25 : 50	0.050 - 0.080
	Martensitic stainless steels - PH		20 : 35	0.050 - 0.080
	Austenitic stainless steels		-	-
	Gray/lamellar cast iron		35 : 60	0.100 - 0.150
	Nodular/nodular cast iron		35 : 60	0.100 - 0.150
	Drawn aluminum alloys		45 : 80	0.090 - 0.150
	Die-cast aluminum alloys		35 : 65	0.090 - 0.150
	Copper		40 : 70	0.090 - 0.150
	Brass - Bronze		35 : 65	0.090 - 0.150
	Lead-free brass		35 : 65	0.090 - 0.150
	Super alloys (Inconel - Hastelloy - Nimonic)		18 : 35	0.030 - 0.060
	Pure titanium (Grade 2 - Grade 4)		18 : 35	0.030 - 0.060
	Titanium alloys (Grade 5)		12 : 20	0.030 - 0.060
	Cobalt Chrome Alloys		-	-
	Hardened steels up to 55 HRC		12 : 20	0.030 - 0.060
	Hardened steels from 55 HRC		-	-

Technical Sheet