d1	d2	l1	l2
14,00	14,00	75	30,00

Coolant holes	Cut	Point angle	Spiral angle	Cutting edges Z
No	Right	90°	18°	2

Coated	Coating type	Material	Material type	Norm
No	-	MD	SMG 10	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/rev)
	Unalloyed steels up to 800 N/mm2		40 : 60	0,14 - 0,25
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		30 : 50	0,13 - 0,20
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		-	-
	Ferritic stainless steels		20 : 40	0,09 - 0,17
	Martensitic stainless steels		20 : 40	0,09 - 0,17
	Martensitic stainless steels - PH		20 : 40	0,09 - 0,17
	Austenitic stainless steels		20 : 40	0,09 - 0,17
	Gray/lamellar cast iron		50 : 80	0,09 - 0,17
	Nodular/nodular cast iron		30 : 60	0,09 - 0,17
	Drawn aluminum alloys		70 : 100	0,15 - 0,30
	Die-cast aluminum alloys		70 : 100	0,15 - 0,30
	Copper		40 : 80	0,15 - 0,30
	Brass - Bronze		40 : 80	0,15 - 0,30
	Lead-free brass		30 : 70	0,14 - 0,25
	Super alloys (Inconel - Hastelloy - Nimonic)		-	-
	Pure titanium (Grade 2 - Grade 4)		25 : 50	0,10 - 0,17
	Titanium alloys (Grade 5)		25 : 50	0,10 - 0,17
	Cobalt Chrome Alloys		-	-
	Hardened steels up to 55 HRC		-	-
	Hardened steels from 55 HRC		-	-

Technical Sheet