d1	d2	l1	l2
3,30	3,30	150	75,00

Coolant holes	Cut	Point angle	Spiral angle	Cutting edges Z
No	Right	118°/130°	25°/30°	2

Coated	Coating type	Material	Material type	Norm
No	-	MD	SMG 10	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/rev)
	Unalloyed steels up to 800 N/mm2		40 : 60	0,005 - 0,020
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		30 : 50	0,005 - 0,012
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		-	-
	Ferritic stainless steels		15 : 30	0,003 - 0,01
	Martensitic stainless steels		15 : 30	0,003 - 0,01
	Martensitic stainless steels - PH		15 :30	0,003 - 0,01
	Austenitic stainless steels		15 : 30	0,003 - 0,01
	Gray/lamellar cast iron		30 : 50	0,008 - 0,015
	Nodular/nodular cast iron		30 : 50	0,008 - 0,015
	Drawn aluminum alloys		60 : 100	0,010 - 0,025
	Die-cast aluminum alloys		50 : 80	0,010 - 0,025
	Copper		30 : 60	0,010 - 0,025
	Brass - Bronze		40 : 70	0,010 - 0,025
	Lead-free brass		30 : 60	0,010 - 0,025
	Super alloys (Inconel - Hastelloy - Nimonic)		-	-
	Pure titanium (Grade 2 - Grade 4)		-	-
	Titanium alloys (Grade 5)		-	-
	Cobalt Chrome Alloys		-	-
	Hardened steels up to 55 HRC		-	-
	Hardened steels from 55 HRC		-	-

Technical Sheet