d1	d2	l1	l2	l3
0,32	3,00	38	1,50	1,70

Coolant holes	Cut	Point angle	Spiral angle	Cutting edges Z
No	Right	130°	35°	2

Coated	Coating type	Material	Material type	Norm
Yes	ALCRONOS	MD	SMG 10	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/rev)
	Unalloyed steels up to 800 N/mm2		5 : 12	0.003-0.008
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		4 : 9	0.002-0.007
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		4 : 7	0.002-0.006
	Ferritic stainless steels		4 : 9	0.002-0.005
	Martensitic stainless steels		3 : 8	0.002-0.004
	Martensitic stainless steels - PH		3 : 8	0.002-0.004
	Austenitic stainless steels		3 : 8	0.002-0.004
	Gray/lamellar cast iron		5 : 12	0.003-0.008
	Nodular/nodular cast iron		4 : 10	0.002-0.007
	Drawn aluminum alloys		6 : 19	0.002-0.006
	Die-cast aluminum alloys		6 : 17	0.003-0.007
	Copper		6 : 15	0.003-0.006
	Brass - Bronze		6 : 15	0.002-0.005
	Lead-free brass		7 : 18	0.003-0.006
	Super alloys (Inconel - Hastelloy - Nimonic)		3 : 7	0.002-0.006
	Pure titanium (Grade 2 - Grade 4)		5 : 8	0.002-0.004
	Titanium alloys (Grade 5)		5 : 8	0.002-0.004
	Cobalt Chrome Alloys		3 : 7	0.002-0.004
	Hardened steels up to 55 HRC		3 : 7	0.002-0.004
	Hardened steels from 55 HRC		-	-

Technical Sheet