d1	d2	l1	l2	l3
1,67	3,00	38	12,00	13,20

Coolant holes	Cut	Point angle	Spiral angle	Cutting edges Z
No	Right	130°	35°	2

Coated	Coating type	Material	Material type	Norm
Yes	ALCRONOS	MD	SMG 10	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/rev)
	Unalloyed steels up to 800 N/mm2		35 : 65	0.014-0.025
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		28 : 55	0.012-0.023
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		23 : 50	0.011-0.020
	Ferritic stainless steels		28 : 55	0.010-0.018
	Martensitic stainless steels		20 : 35	0.008-0.016
	Martensitic stainless steels - PH		20 : 35	0.008-0.016
	Austenitic stainless steels		20 : 35	0.008-0.016
	Gray/lamellar cast iron		35 : 65	0.017-0.025
	Nodular/nodular cast iron		30 : 55	0.012-0.022
	Drawn aluminum alloys		45 : 80	0.012-0.020
	Die-cast aluminum alloys		45 : 70	0.014-0.022
	Copper		35 : 65	0.012-0.020
	Brass - Bronze		35 : 65	0.009-0.016
	Lead-free brass		40 : 70	0.012-0.020
	Super alloys (Inconel - Hastelloy - Nimonic)		23 : 50	0.012-0.020
	Pure titanium (Grade 2 - Grade 4)		18 : 35	0.006-0.011
	Titanium alloys (Grade 5)		18 : 35	0.006-0.011
	Cobalt Chrome Alloys		12 : 20	0.006-0.011
	Hardened steels up to 55 HRC		12 : 20	0.006-0.011
	Hardened steels from 55 HRC		-	-

Technical Sheet