d1	d2	l1	l2
3,25	6,00	75	36,60

Coolant holes	Cut	Point angle	Spiral angle	Cutting edges Z
Yes	Right	140°	30°	2

Coated	Coating type	Material	Material type	Norm
Yes	TiAIN	MD	SMG SP	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/rev)
	Unalloyed steels up to 800 N/mm2		45 : 75	0.26
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		40 : 70	0.25
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		35 : 70	0.2
	Ferritic stainless steels		30 : 50	0.09
	Martensitic stainless steels		30 : 50	0.125
	Martensitic stainless steels - PH		30 : 50	0.08
	Austenitic stainless steels		20 : 40	0.08
	Gray/lamellar cast iron		20 : 60	0.35
	Nodular/nodular cast iron		15 : 40	0.35
	Drawn aluminum alloys		100 : 300	0.135
	Die-cast aluminum alloys		80 : 250	0.155
	Copper		60 : 120	0.135
	Brass - Bronze		80 : 140	0.155
	Lead-free brass		80 : 140	0.17
	Super alloys (Inconel - Hastelloy - Nimonic)		15 : 25	0.025
	Pure titanium (Grade 2 - Grade 4)		15 : 25	0.1
	Titanium alloys (Grade 5)		15 : 30	0.1
	Cobalt Chrome Alloys		15 : 30	0.035
	Hardened steels up to 55 HRC		20 : 40	0.025
	Hardened steels from 55 HRC		15 : 30	-

Technical Sheet