d1	d2	d3	l1
4,00	4,00	1,50	50

Coolant holes	Cut	Point angle	Spiral angle	Cutting edges Z
No	Right	90°	10°	6

Coated	Coating type	Material	Material type	Norm
Yes	ALCRONOS	MD	SMG 10	TUSA

Machinable Materials
Cod.	Material type	Machinability	Cutting speed Vc	Advancement per revolution fn
		Recommended Part. recommended Not recommended	(m/min)	(mm/rev)
	Unalloyed steels up to 800 N/mm2		120	0.03 - 0.05
	Low alloy steels from 800 N/mm2 to 1100 N/mm2		100	0.02 - 0.04
	Highly alloyed steels from 1100 N/mm2 to 1400 N/mm2		80	0.01 - 0.02
	Ferritic stainless steels		50	0.02 - 0.03
	Martensitic stainless steels		80	0.01 - 0.03
	Martensitic stainless steels - PH		-	-
	Austenitic stainless steels		50	0.02 - 0.03
	Gray/lamellar cast iron		60	0.01 - 0.03
	Nodular/nodular cast iron		60	0.01 - 0.03
	Drawn aluminum alloys		200	0.03 - 0.07
	Die-cast aluminum alloys		200	0.03 - 0.07
	Copper		40	0.02 - 0.03
	Brass - Bronze		200	0.02 - 0.03
	Lead-free brass		40	0.03 - 0.07
	Super alloys (Inconel - Hastelloy - Nimonic)		40	0.02 - 0.03
	Pure titanium (Grade 2 - Grade 4)		40	0.02 - 0.03
	Titanium alloys (Grade 5)		40	0.02 - 0.03
	Cobalt Chrome Alloys		50	0.02 - 0.03
	Hardened steels up to 55 HRC		60	0.01 - 0.03
	Hardened steels from 55 HRC		-	-

Technical Sheet